Battery Charger - New i2 - Nitecore

This new version of the Nitecore I2 charger the New I2 is a revolution with 6 new features: A charge speed increased by 100% to 2 x 500mA or once 1000mA Intelligent distribution that allows a battery to be charged faster when the second in the charger is full.

Compatible with 3.7V and 4.35V batteries A restoration for IMR batteries Automatic selection of the charging current by detecting the battery capacity.

Automatic detection of non-rechargeable batteries. (it is recommended to charge the same type of battery at the same time). This charger is perfectly nomadic, thanks to its cigarette lighter cable (sold separately), you can use it from your car.

Operating mode:

Insert the battery (s), the automatic detection will do the rest for you. However and only if you insert a LiFePO4 battery in 3.2V it will be necessary to select the 3.7V mode manually on the charger so as not to damage the battery. All you need to do is press the V button.

For IMR battery restore, insert the battery (s) into the charger and hold the C and V buttons to activate the restore. The charging speed with a battery will be 1000mA if the battery capacity exceeds 1200mAh otherwise the charge will be 500mA. If you put 2 batteries the speed will always be 500mA, however when one battery is at 100% the charger will change the charge of the second battery to 1000mA if the battery capacity is greater than 1200mAh.

List of compatible batteries: Li-Ion / IMR / LiFePO4: 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16500,16340 (RCR123), 16650, 17350, 17500, 17650, 18350, 18490, 18500, 18650, 22500, 22650, 25500, 26500, 26650 Ni-MH / NiCd: AA, AAA, AAAA, C, D

Characteristics:

• Input: AC 110 - 240V 50 / 60Hz 0.25A 8W or DC 9 - 12V
• Output: 4.35V / 4.2V / 3.7V / 1.48V Output current: 2 x 500mA or 1 x 1A
• Dimension: 132mm x 70mm x 35mm
• Weight: 126g (without batteries and power cord) Can charge 2 batteries simultaneously Automatic detection of battery capacity Charge indicator composed of 3 LEDs 30% / 80% / 100% Manual battery voltage selection IMR battery restoration function
• Reverse polarity protection
• Automatic charging stop after 10 hours of charging to prevent the battery from overheating.
• Designed for optimal heat dissipation CE, RoHS, FCC and CEC standard
• 1 year warranty NEW i2 charger supplied with a 220V bipolar mains cable