Poussoir Ergonomique "Thumb Tabs Tritium Design" pour Leatherman Charge +, TTI, and G10 - EDCmods

2 "tritium design" push buttons for Leatherman Charge +, TTI, and G10 (basically for the latest generation models...) designed to insert 2mm x 12mm tritium tubes (not included).
These tritium tubes, which you can easily find online in several colors, are simply glued with a drop of Loctite Classic or UV.

Multitool blades are sometimes difficult to grip, or even impossible to deploy if you're wearing gloves. These sturdy ABS thumb tabs, perfectly smooth and shiny, just like LEGO, are designed to facilitate opening.

The blade hole is slightly larger (16.4mm) than the serrated blade. Therefore, there are two sizes of thumb tabs!

CAUTION: >>> Measure the hole carefully!
Carefully check the blade hole size, especially if you bought your Charge second-hand. There's no guarantee that the blade hasn't been replaced with an older, therefore different one.
Only for recent CHARGE models (versions: +, TTI, G10)!
For older CHARGE TI, AL, ALX, Xti-+-(18.3mm) models, see here > (ON SALE HERE)
Installation is very simple: simply apply force and a drop of cyanolite (super glue)!

There may be a slight adjustment to be made depending on the color, as they don't all react the same way when smoothing.
In any case, it's a simple operation that any child can do.

Want to remove them?
The manly solution: pushing the button with a screwdriver works wonders.
Scrape off the remaining glue and you can put them back on whenever you like or change them to another color!

ATTENTION: will only be compatible with the hoster for WAVE+/CHARGE (sold in our store) if you only use one >> (ON SALE HERE)