Purchase a gift voucher
This unique Huma-Air regulator set with the special Huben KG1 matte black anodized adapter and the front end cap with pressure gauge is specially designed for the Huben GK1 PCP Pistol. It will turn your air pistol into a fully regulated pistol with fantastic accuracy.
After the set is fitted and you have adjusted the pistol you will see a totally flat shotstring what will give you air pistol an excellent concistancy.
Due to our compact design it is still posible to screw on an 1/2UNF moderator like our Mod30 Mini (what matches perfect with the pistol design) or it can even be used with our quick connect moderator H-Loc adapter 23 mm.
The fitting is very easy; with just a few allen keys you can assemble the kit to th pistol. The pressure tube and endcap with pressure gauge can be aligned perfecty straight for the eye. Both threaded end parts of the pressure tube can be adjusted for about half a turn. They do not have to be screwed on thight.
After you fitted the set you can read the fill pressure on the endcap of the pressure tube and the original factory pressure gauge will indicate the regulated pressure of the Huben GK1 PCP Pistol
The regulator is vented to the atmosphere, so no creeping up in power in long term.
Please note: The maximum fill pressure of the pistol with the regulator kit is 300 bar. (due to the maximum pressure of the pressure gauge)
The tuning regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.
Designed for a wide pressure range in the middle pressure range (MP: 70-165 bar output) or if you are looking for very high power there is also an Extra High Pressure available in a range of 100-200 bar output. Please note the Middle Pressure range has a faster recovery time compared to the Extra High Pressure model.
We recommend not going lower than 110-120bar on the regulator to maintain reliable indexing of the magazine.
Huma Air regulators are CNC produced out of high grade aircraft aluminum and bronze. To guarantee a perfect product, every regulator is individually assembled, tested in a computerized simulation program and adjusted to the requested pressure.
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.
Huma Air provides a 2-year warranty on their regulators. Excluded from warranty are shipping costs and parts that are subject to normal wear and tear such as o-rings and valve discs.